# INTEL Raid0

### [INTEL RAID DRIVERS](https://www.mediafire.com/file/k5v8fz0zatmpzsd/Extract_This_Folder_On_To_Your_USB_INTEL.zip/file) <a href="#intel-raid-drivers" id="intel-raid-drivers"></a>

### &#x20;<a href="#undefined" id="undefined"></a>

### Make sure you have windows installed on your USB as per Step 1 in normal re-installation. <a href="#make-sure-you-have-windows-installed-on-your-usb-as-per-step-1-in-normal-re-installation" id="make-sure-you-have-windows-installed-on-your-usb-as-per-step-1-in-normal-re-installation"></a>

#### &#x20;<a href="#msi" id="msi"></a>

### MSI <a href="#msi-1" id="msi-1"></a>

1- Turn on PC, spam the **\[Del]** key continuously to enter the BIOS menu.

2- Select **\[SETTINGS]** → **\[Advanced]** → **\[SATA mode]** as **\[RAID/Optane Mode]**

3- Press **\[F10**] → Select **\[Yes]** to save and exit, your PC will restart on its own.

4- repeat step 1 again, and boot into BIOS menu.,

5- Select **\[SETTINGS]** → **\[Advanced]**→ select **\[Intel(R) Rapid Storage Technology]**

6- Select **\[Create RAID Volume]**

7- Select **\[RAID Level]**: RAID0 or Volume if available.

8- Select all available disks. then Click **\[create Volume]**

### ASUS <a href="#asus" id="asus"></a>

1- Turn on PC, spam the **\[Del]** key continuously to enter the BIOS menu. **\[EZ Mode]**，check the connect drive in Storage Information.

2- Press F7 key and enter **\[Advanced Mode]**.

3- Click **\[PCH Storage Configuration]** item on the advanced page.

4- Click **\[SATA Mode Selection]** item and set to **\[Intel RST Premium With Intel Optane System Acceleration(RAID)]**.

5- click **\[M.2\_1 PCIE Storage RAID Support]** and set to **\[RST Controlled]**

6- Click **\[M.2\_2 PCIE Storage RAID Support] (YES THIS IS A DIFFERENT STEP)** and set t&#x6F;**\[RST Controlled]**

7- Enter **\[Boot]** page and set **\[Launch CSM]** to **\[Disabled]**

8- Press F10 key and click OK then the system will restart on its own.

9- Press **\[del]** key after the system reboot and enter BIOS **\[EZ Mode]**

10- Press F7 key and enter **\[Advanced Mode]** as below picture.

11- Click **\[Advanced]** page and click **\[Intel(R) Rapid Storage Technology] .**

12- Click **\[Create RAID Volume].**

13- Set a random RAID name and choose RAID Level: RAID0 or Volume if available.

14- Select all available disks.

15- Click **\[Create Volume]** to create RAID.

### GIGABYTE <a href="#gigabyte" id="gigabyte"></a>

1- Turn on PC, spam the **\[Del]** key continuously to enter the BIOS menu.

2- Go to Peripherals\SATA And RST Configuration → make sure SATA Controller(s) is enabled.

3- set SATA Mode Selection → Intel RST Premium With Intel Optane System Acceleration.

4- In BIOS Setup, go to BIOS tab → set CSM Support → Disabled.

5- Save the changes and exit BIOS Setup.

6- After the system restarts, enter BIOS Setup again. Then enter the Peripherals\Intel(R) Rapid Storage Technology sub-menu, then press **\[Enter]** on Create RAID Volume.

7- Enter a random volume name with 1-16 letters (letters cannot be special characters/ please do not use stuff like dick/n1gger/funny names) under the name and press **\[Enter].**

8- select RAID0 or Volume if available. Next, use the down arrow key to move to Select Disks.

9- Under Select Disks item, select all hard drives to be included in the RAID array. Press the **\[Space]** key on the hard drives to be selected (selected hard drives are marked with "X").

10- Move to Create Volume and press **\[Enter]** to begin.

11- Check if RAID volumes are created.

### ASROCK <a href="#asrock" id="asrock"></a>

→ <https://download.asrock.com/Manual/RAID/Z170%20Pro4/English.pdf>

### ROG STRIX <a href="#rog-strix" id="rog-strix"></a>

→ [https://rog.asus.com/articles/crosshair-motherboards/what-is-raid-setup-guid](https://rog.asus.com/articles/crosshair-motherboards/what-is-raid-setup-guide)