AMD RAID (Raidable)

AMD RAID (Raidable)

Determine Your Drivers & Download :

Check your CPU:

1 Open Task Manager

Click on Performance

Click On "CPU"

Look on Top right, it will say your CPU

See below for list of AM5 Processors :

List of AM5 CPUs:

• Ryzen 5 7500F

• Ryzen 5 PRO 7645

• Ryzen 5 7600

• Ryzen 5 7600X

• Ryzen 7 PRO 7745

• Ryzen 7 7700

• Ryzen 7 7700X

• Ryzen 7 7800X3D

• Ryzen 9 PRO 7945

• Ryzen 9 7900

• Ryzen 9 7900X

• Ryzen 9 7900X3D

• Ryzen 9 7950X

• Ryzen 9 7950X3D

• Any Ryzen CPU that looks like: Ryzen _ 7000+

If your CPU is not listed here, then it is an AM4 processor. Choose the file below that corresponds to your CPU.

Extract drivers to your USB Installation Right click the drivers files you downloaded and extract them on to your installation medium (USB stick). You USB should look EXACTLY like this:

Enabling the RAID mode

1. Restart your computer and enter the BIOS again.

2. Locate following options and set them to following value:

To Locate your SATA Mode:

Go to advanced mode in bios:

Asus: Advanced -> SATA Configuration

Gigabyte: Settings/Advanced -> IO Ports

ASRock: Advanced -> Storage Configuration

MSI: Advanced -> Integrated Peripheral Once found:

1. Set SATA mode/controller -> [ RAID mode]

   1. Change: AHCI -> RAID Mode

2. Set NV Me mode -> [ Enabled]

   1. If you don't have NV Me, ignore and make sure SATA mode is set.

Go to Boot tab:

1. Set CSM -> [ Disabled]

   1. If you can't find CSM ensure UEFI is enabled.

2. Save & exit the BIOS, then return back to BIOS again!

Clearing Disks

Back in BIOS locate following option: Advanced -> RAIDXpert2 Configuration Utility. (On Gigabyte: Settings -> IO Ports -> RAIDXpert2 Configuration Utility.)

In the RAIDXpert2 menu do the following:

1. Enter Manage Arrays / Array Management.

2. Select Delete Arrays (if not grayed out).

   1. Select every single disk you have!

   2. Confirm to delete (this will delete all data on the disks).

3. If successful it will say: No more disks to delete!

Creating array(s)

In RAIDXpert2 navigate to Manage Arrays / Array Management -> Create Array.

1. Select Raid Level Radiable

2. Select Select Physical Disks

   1. Select your disk; choose Enable

   2. Select Apply Changes

Press Create array to create the array.

If you have multiple disks; create an array for each individual disk.

Installing windows

AM4

Installation for AM4 Processors:

• Save & exit the BIOS and ensure the USB you set up is plugged into your pc.

• You should see the Windows setup like the image below!

  

AM5

Installation for AM4 Processors:

• Save & exit the BIOS and ensure the USB you set up is plugged into your pc.

• You should see the Windows setup like the image below!\

  • Change the language settings if needed.

  • Press next in the setup.

  • If the setup ask your for-product key, select I don't have a product key

  • Select the operating system: Windows 10 Pro

  • Accept the TOS and press next.

  • Now at setup step Where do you want to install Windows? you select Load driver. - will get a pop-up; select browse:

    • Navigate to the USB stick.

    • Then select folder dropdown Put this folder on USB

    • Select the NVMe_RAID or SATA_RAID -> Press Ok.

    • Choose the first option; "AMD-RAIDBottomDevice" Driver, then select next. \

      1. Select Load driver again.

      2. Navigate to the USB stick.

      3. Then select folder dropdown Put this folder on USB

      4. Select the NVMe_RAID or SATA_RAID -> Press Ok.

      5. Choose the third option; "AMD-RAID Controller" Driver, then select next.

         • Select the disk you want to install Windows on and press next.

         • Continue to install windows; then you're done!

How to check if my raid worked after reinstalling windows?

1 Open Task Manager

2 Click Performance

3 Click on " Disk 0 (C:) "

4 Should say on top right "AMD-RAID"